Frequently Asked Questions
Page Contents
About ANAB
Recognition
General
Laboratory Accreditation ISO/IEC 17025
Laboratory Technical Questions
Management Systems ISO/IEC 17021-1
Validation and Verification ISO 14065
Personnel Credentialing ISO/IEC 17024 and ASTM E2659
Product Certification ISO/IEC 17065
Training FAQ
About ANAB
What is the ANSI National Accreditation Board?
Why should I use the services of ANAB?
Under what authority does ANAB operate?
Who oversees ANAB’s work?
How is ANAB financially supported?
What are the benefits of accreditation?
How are ANAB and ANSI related, and what’s the history behind the company name?
Can I get standards from ANAB?
How can I get the current ANAB logo or accreditation symbol?
What is ANSI certification and what is the cost of ANSI certification?
What is the ANSI National Accreditation Board?
The ANSI National Accreditation Board is a non-governmental organization that provides accreditation services to public- and private-sector organizations. ANAB is a wholly owned subsidiary of the American National Standards Institute (ANSI).
Why should I use the services of ANAB?
ANAB is committed to customer service and technical competence and maintains international recognition. We provide quality and value to our customers. Our staff and assessors are technically competent, personable, and effective communicators. This ensures a more beneficial and pleasant experience for our customers.
Under what authority does ANAB operate?
ANAB is a Wisconsin limited liability company. ANAB operations are in keeping with U.S. government support for use of standards and conformity assessment solutions developed or adopted by private, voluntary consensus standards bodies in lieu of developing government-unique standards or regulations (per the National Technology Transfer and Advancement Act of 1995, Public Law 104-113). ANAB operations are also consistent with the government’s endorsement of close interaction and cooperation between the public and private sectors as critical to developing and using standards that serve national needs and support innovation and competitiveness (per the Office of Management and Budget A-119: Federal Participation in the Development and Use of Voluntary Consensus Standards in Conformity Assessment Activities).
ANSI, the owner of ANAB, is the U.S. body to the International Organization for Standardization (ISO). ANAB’s Accreditation Councils are composed of representatives of stakeholders of ANAB programs, including government.
Who oversees ANAB’s work?
ANAB complies with international standards and requirements for accreditation bodies and is a member of the International Accreditation Forum (IAF), International Laboratory Accreditation Cooperation (ILAC), InterAmerican Accreditation Cooperation (IAAC), and Asia Pacific Accreditation Cooperation (APAC). ANAB is signatory of relevant IAF, ILAC, IAAC, and APAC multilateral cooperative arrangements (MLAs) and multilateral recognition arrangements (MRAs). Members of these organizations are admitted to the MLAs/MRAs after a stringent assessment of their operations by a peer evaluation team charged to ensure full compliance with international standards and IAF, ILAC, IAAC, and APAC requirements. MLA/MRA signatories are required to recognize the certificates and reports issued by bodies accredited by all other signatories of the MLAs/MRAs.
Through the IAF, ILAC, IAAC, and APAC MRAs/MLAs, ANAB cooperates with other accreditation bodies around the world to provide value to its accredited customers and their customers, ensuring that accredited certificates are recognized nationally and internationally. The global conformity assessment system ensures confidence and reduces risk for customers engaging in trade worldwide.
How is ANAB financially supported?
ANAB is supported by fees charged for the services it provides.
What are the benefits of accreditation?
Accreditation provides formal recognition to competent organizations. It provides a conduit for regulators and industry to find reliable products and services to meet their specific needs. Accreditation is a means to reduce costs and redundancy and eliminate trade barriers. Most important, accreditation assures industry and government decision-makers that accredited organizations are competent and their results can be relied on.
For more information on the benefits of accreditation for public sector organizations, visit the Public Sector Assurance site.
How are ANAB and ANSI related, and what’s the history behind the company name?
ANAB was established in 1989 as the Registrar Accreditation Board (RAB) by the American Society for Quality. ANAB’s relationship with ANSI dates almost to its beginnings as RAB. On December 13, 1991, RAB and ANSI agreed to operate the American National Accreditation Program for Registrars of Quality Systems, and 12 certification bodies accredited by RAB prior to the agreement were subsequently converted to accreditation under the ANSI-RAB program.
After RAB introduced its second accreditation program in May 1996, a second agreement was negotiated with ANSI. The ANSI-RAB National Accreditation Program covered ISO 9000 quality and ISO 14000 environmental management systems.
Effective January 1, 2005, the ANSI-RAB NAP became a legal entity, jointly owned by ANSI and ASQ, and renamed the ANSI-ASQ National Accreditation Board. ANSI acquired full interests in ANAB in December 2018, strengthening ANSI’s and ANAB’s abilities to provide the highest quality third-party accreditation services for diverse global markets. ANAB is a wholly owned subsidiary of ANSI, registered as a separate legal entity and renamed the ANSI National Accreditation Board.
As the voice of the U.S. standards and conformity assessment system, ANSI empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment. ANSI oversees the creation, promulgation, use of thousands of norms and guidelines that have a direct impact on businesses in nearly every sector.
Can I get standards from ANAB?
No. ANAB does not provide standards. You can purchase standards to which ANAB offers accreditation from the ANSI Webstore. Many standards mentioned on ANAB’s website are linked to the ANSI Webstore. Some industry-specific standards are available free or for purchase from the scheme owners.
How can I get the current ANAB logo or accreditation symbol?
The ANAB logo (displayed at the top of this website) is for use only by ANAB to identify itself and shall not be used by any other entity. ANAB issues accreditation symbols to accredited conformity assessment bodies (laboratories, certification bodies, forensic service providers, inspection bodies, etc.) to indicate their accredited status. Your ANAB contact can provide the appropriate ANAB accreditation symbol for your accredited organization.
An organizations issued a certification by an ANAB-accredited certification body can use the ANAB accreditation symbol in conjunction with the certification body symbol (as provided directly by the certification body to the certified organization).
What is ANSI certification and what is the cost of ANSI certification?
Inquiries about ANSI certification typically refer to one of the ANAB credentialing programs (which previously were ANSI programs, as were current ANAB accreditation programs for ISO/IEC 17065 product, process, and service certification bodies and for ISO 14065 validation and verification bodies).
ANAB accredits ISO/IEC 17024 certification and ASTM E2659 certificate programs, which are two different things. ANAB also accredits organizations providing food-handler training courses and certificates, which are required in some states and localities. ANAB does not set pricing for the certification and certificate programs provided by ANAB-accredited organizations. You should contact directly the certification body or certificate issuer to determine the cost.
Recognition
- Is ANAB recognized domestically and internationally?
- How does ANAB demonstrate its capability as an accreditation body?
Is ANAB recognized domestically and internationally?
ANAB is a signatory of the multilateral recognition arrangements (MRAs) of the International Laboratory Accreditation Cooperation (ILAC) and the Asia Pacific Accreditation Cooperation (APAC). ANAB also is a signatory of the International Accreditation Forum (IAF) and Inter-American Accreditation Cooperation (IAAC) multilateral recognition arrangements (MLAs). Domestically, ANAB has been recognized by the Federal Communications Commission, the National Institute of Standards and Technology (NIST) National Voluntary Conformity Assessment Systems Evaluation Program (NVCASE), the NELAC Institute (TNI), and many other private and government organizations.
How does ANAB demonstrate its capability as an accreditation body?
ANAB, like other MRA/MLA-signatory accreditation bodies, is evaluated regularly by its peers in the international accreditation community. This includes evaluation of its compliance with the requirements of ISO/IEC 17011, Conformity assessment – General requirements for accreditation bodies accrediting conformity assessment bodies. The evaluators also accompany ANAB assessors and staff on select assessments to evaluate the diligence and appropriateness of the assessment process to conform with ISO/IEC 17011 and the relevant standard used to assess the conformity assessment body.
General
- What is conformity assessment?
- What is accreditation?
- What’s the difference between accreditation and certification?
- What does accreditation cover?
- Is accreditation mandatory?
- What is transparency in coverage?
What is conformity assessment?
ISO/IEC 17000:2019 defines conformity assessment as “demonstration that specified requirements are fulfilled.”
A standard is a technical expression of how to make a product safe, efficient, and compatible with others. But standards are just good ideas unless products, processes, systems, and personnel conform to them. Conformity assessment provides assurance to consumers by increasing consumer confidence when personnel, products, systems, processes, or services are evaluated against the requirements of a voluntary standard.
What is accreditation?
Accreditation denotes both a status and process. As a status it denotes conformity to a specific standard as set forth by an accrediting agency and as a process it shows a commitment to continuous improvement. ISO/IEC 17000:2019 defines accreditation as “third-party attestation to a conformity assessment body conveying formal demonstration of its competence, consistent operation and impartiality in performing specific conformity assessment activities.”
What’s the difference between accreditation and certification?
Certification of products, personnel, or management systems (such as ISO 9001 or ISO 14001) demonstrates conformity to the requirements of a standard. Accreditation is the procedure by which an authoritative body gives formal recognition that a body or person is competent to carry out specific tasks. Both accreditation and certification use criteria and procedures to implement such activities.
What does accreditation cover?
The scope of the accreditation is determined by the standard to which the conformity assessment body is accredited. In general, the accreditation standard covers aspects of governance, disclosure, fairness to candidates, non-discrimination, and disclosure.
Is accreditation mandatory?
Accreditation is voluntary. Accreditation by ANAB provides an exemplary level of credibility, integrity, and trust.
What is transparency in coverage?
In an effort to improve price and quality transparency in American healthcare, the Departments of Health and Human Services, Labor and the Treasury created a Transparency in Coverage Rule that requires health insurers and group health plans to post publicly available machine-readable files that include in-network negotiated payment rates and historical out-of-network charges for covered items and services, including prescriptions drugs. Please use this link to access the files: transparency-in-coverage.uhc.com
Laboratory Accreditation Process
- How do I start the accreditation process?
- I need help preparing for accreditation; can ANAB help?
- What information is available to ANAB customers?
- How much advance notice is provided in scheduling assessments?
- How long will it take to be notified of accreditation results after the assessment?
- How is the scope of lab accreditation established?
- Are all ANAB fees disclosed in my quote?
- How can I inform my customers that my company has applied for ANAB accreditation?
How do I start the accreditation process?
Call ANAB at 414-501-5455, to begin a mutually beneficial dialog. We start by gathering information and in a short time can recommend specific guidance documents, provide pricing information, explain the estimated timeline of accreditation for your company, and answer any questions. Then we’ll send a quote, application for accreditation, and all necessary documentation. You can also download a request for quote and an application from this website.
I need help preparing for accreditation; can ANAB help?
We offer several types of preparatory evaluations prior to the assessment; however, we cannot engage in consulting. We have tools, resources, and contacts to which we can direct you to help you get started. We also offer training related to our accreditation programs.
What information is available to ANAB customers?
ANAB has an open system. Customers have access to any documentation that’s not restricted based on privacy, accreditation mandate, or other legal issues. This includes checklists used in the accreditation process.
How much advance notice is provided in scheduling assessments for laboratories?
For laboratories, assessment schedules for current customers are maintained approximately 120 days in advance. Customers typically receive assessment schedules 30 to 60 days in advance.
How long will it take to be notified of accreditation results after the assessment for laboratories?
At the end of the accreditation assessment, you’ll receive a copy of the assessor checklist and any nonconformities. The assessor will tell you prior to leaving the facility if your company will be recommended for accreditation. After corrective action responses are approved, ANAB will begin the accreditation decision review process. A certificate and scope of accreditation are issued if your company is approved for accreditation.
How is the scope of accreditation established?
The scope of accreditation for a laboratory details the specific tests and/or calibrations for which the laboratory is accredited. Other types of accredited organizations have similarly detailed scopes of accreditation. To ensure consistent uniformity for all scopes of accreditation, the format must be written in accordance with NIST 811, Guidelines for the Expression of SI Units. Also refer to the ANAB Guidance Document on Scopes of Accreditation.
Are all ANAB fees disclosed in my quote?
The only charges not included in our quotes are for actual travel costs, any time for corrective action review, and reimbursement for assessor travel time. If travel is required, we try to keep expenses to a minimum. ANAB monitors assessor travel arrangements to ensure costs are as low as possible. Assessment time (days on site) may vary depending on the complexity of the proposed scope of accreditation.
How can I inform my customers that my company has applied for any ANAB accreditation?
ANAB provides a letter stating that accreditation is in progress so your customers understand you’re working to become accredited.
Technical Questions About Laboratory Accreditation
- What’s the difference between CMC and MU?
- What will my assessor look for when reviewing my CMC budgets?
- Does ANAB offer accreditation to ANSI-NCSL Z540-1 and Z540.3? How does the assessment differ from the ISO/IEC 17025 assessment?
- Do test labs have to estimate measurement uncertainty?
- Do we need to have participated in proficiency testing or inter-laboratory comparisons (PT/ILC) before our initial assessment? Do we need to demonstrate participation for every discipline on our proposed scope of accreditation? What about continuing requirements?
- What is a scope of accreditation?
- The laboratory I’ve been using for calibration of my standards says it complies with ISO/IEC 17025 but only has an ISO 9001 certificate on its website. Why?
- What proof of traceability is required during assessments?
- Am I required to participate in proficiency testing (PT) and/or inter-laboratory comparisons (ILC)? How often and what are the costs? What if there no commercial PTs or ILCs are available?
- What about NIST traceable v. traceability to the SI Unit? Can I be traceable to another country’s NMI instead of NIST?
What’s the difference between CMC and MU?
CMC stands for calibration and measurement capability, while MU stands for measurement uncertainty. CMC is a calibration laboratory’s “best capability.” This means calibration was performed using the best standards, with the smallest uncertainty, the smallest error, and under the best environmental conditions, with calibration performed on a very high-end piece of equipment. In other words, the calibration is as near ideal as possible for a given calibration laboratory. These CMC values are reported on your scope of accreditation.
Because a calibration laboratory cannot always work in its best environment and with its best reference standards, it needs to calculate an MU for each particular instrument it calibrates. In this case, the laboratory needs to estimate the uncertainty, taking into account potentially larger uncertainties and errors (compared w those in its CMCs) from its working standards, the contribution of more environmental variance, and possibly use of a lower-end piece of equipment with less resolution.
What will my assessor look for when reviewing my CMC budgets?
First, the assessor will want to see your procedure for calculating the uncertainty budgets. The procedure should include a method for identifying all the potential error contributors for a calibration. It should also refer to any software you intend to use and the coverage factor you’ll be reporting (usually k=2). You might also want to describe when and why a contributor may be excluded because it won’t be significant.
The second area to be reviewed will be the contributors in your uncertainty budgets to see how they were determined. We’ll verify the uncertainty from your calibration certificates to make sure they’re correct. We’ll look at standard error from the calibration certificates, repeatability studies, contributions of environmental variance, deflection, etc.
Last, we’ll review uncertainty budgets to make sure you’re using the proper distributions in the calculations. It’s very important that these are correct because the budgets could be over- or understated dramatically if these are improperly applied.
Does ANAB offer accreditation to ANSI-NCSL Z540-1 and Z540.3? How does the assessment differ from the ISO/IEC 17025 assessment?
We continue to offer assessment of the requirements of both standards for our ISO/IEC 17025 customers. For ANSI-NCSL Z540.3, we assess the requirements of section 5.3, the only section not already covered during the ISO/IEC 17025 assessment. This requires an additional half-day of assessment time during initial assessment and reassessment. The scope and certificate of accreditation will refer to both standards when they’ve been verified.
Although ANSI-NCSL Z540-1 has been replaced by Z540.3, it’s still referred to in some of our customers’ contracts and we therefore offer it to customers who request it. The additional requirements are included in the ISO/IEC 17025 checklist and identified as “Z540-1.” No additional assessment time is required. The scope and certificate of accreditation will refer to both standards when they’ve been verified.
For ISO/IEC 17025 customers who request assessment to both of these national standards, the scope and certificate of accreditation will refer to all three standards.
Do test labs have to estimate measurement uncertainty?
Every ISO/IEC 17025 accredited lab needs to be diligent about uncertainties, including all testing labs. In fact, all ISO/IEC 17025 accreditation visits must include verification that the laboratory has demonstrated this diligence. There must be a documented procedure in the system describing how uncertainties are handled. For some testing labs, this may be a simple statement that all tests are qualitative and not quantitative and they do not need to determine any uncertainties. Most testing labs do not need to calculate or demonstrate what we call ISO-GUM uncertainties for all relevant uncertainties for tests on their scope of accreditation. They rarely if ever might report an uncertainty on any test report either. They only need to demonstrate to their ISO/IEC 17025 assessors with a few specific examples how they would calculate those MUs for a customer requesting them.
Do we need to participate in proficiency testing or inter-laboratory comparisons (PT/ILC) before our initial assessment? Do we need to demonstrate participation for every discipline on our proposed scope of accreditation? What about continuing requirements?
ANAB requires that applicant labs demonstrate proof of participation in a test that meets the requirements of ISO/IEC 17043 prior to the initial assessment visit, whenever possible. This means that the lab must have participated and provided its input to the provider, but the results may or may not be available yet. The lab is required to forward the results to ANAB when they are available. If no results have been received within six months of accreditation, the accredited laboratory is subject to suspension until ANAB receives them. The minimum required participation prior to the initial assessment visit is one discipline from the proposed scope of participation.
Following the initial accreditation, ANAB requires that accredited labs participate in at least one PT/ILC each calendar year. In addition, the lab must participate in at least one PT/ILC for each major sub-area of its scope of accreditation during any calendar four-year period. Major sub-areas are identified on the scope of accreditation by Roman numerals (I. Dimensional Calibration, II. Thermal Testing, etc.).
What is a scope of accreditation?
The scope of accreditation is a document listing a laboratory’s specific test or calibration capability as verified by the accreditation body. For a calibration laboratory, the scope includes the type of test or calibration, range or detection limits, reference standards, and procedures used and the calibration and measurement Capabilities (CMCs). The scope refers to a certificate of accreditation.
The laboratory I’ve been using for calibration of my standards says it complies with ISO/IEC 17025 but only has an ISO 9001 certificate on their website. Why?
Chances are it is not accredited. Laboratories accredited by an accreditation body that is a signatory of the ILAC mutual recognition arrangement (MRA) have been assessed to all the requirements of ISO/IEC 17025. This means all aspects of the management and calibration processes were evaluated. This evaluation includes traceability, measurement uncertainty (MU), use of acceptable methods, environmental controls, results, reporting, and many other factors. It also includes a complete review of the management system of the laboratory. As a signatory of the ILAC MRA, ANAB can accept for calibration traceability only laboratories that have been accredited by an MRA signatory accreditation body. We trust that they have done as good a job as we would in assessing a laboratory’s capabilities.
What proof of traceability is required during assessment?
During initial assessment and reassessment, assessors review proof of “metrological traceability” for all standards listed on the proposed or existing scope of accreditation. The easiest way to demonstrate traceability is by producing a calibration certificate issued by a national metrology institute, such as the National Institute of Standards and Technology, or by a laboratory accredited for that discipline by an accrediting body, such as ANAB, that is an International Laboratory Accreditation Cooperation (ILAC) signatory. A list of ILAC signatories is available from ILAC. If you can’t find an NMI or accredited source for the calibration, contact ANAB for assistance.
Am I required to participate in proficiency testing (PT) and/or inter-laboratory comparisons (ILC)? How often and what are the costs? What if there are no commercial PTs or ILCs available for me?
Unfortunately, there’s a shortage of proficiency testing programs available to accredited laboratories around the world. In many cases, especially for testing labs, there is no reasonable PT program available. Most accreditation bodies, including ANAB, require accredited labs to participate every year in some form of PT or reasonable alternative if none is available. ANAB must approve the alternative. We also have a framework to approve any PT program that is not commercially offered but might satisfy the PT requirement for ANAB-accredited labs. Costs can run from a few hundred dollars to more than $1,000 for some programs and the frequency of participation. We work with each lab on its PT programs at each visit to make them increasingly value-added to their QA and to building international confidence in their demonstration of competence via PT/ILC.
What about NIST traceable v. traceability to the SI Unit? Can I be traceable to another country’s NMI instead of NIST?
NIST traceable calibrations are often called ISO 9001 calibrations. In the ISO/IEC 17025 world, the term we should use is metrological traceability, and the chain of comparisons is to the SI unit, not any particular national metrology institute (NMI). The vast majority of the global NMI’s participate with each other in comparisons to most of the highest precision measurements to measure or “realize” many of the SI units or other indirect unit. The participants recognize each other through these “key comparisons,” and thus the traceability chain can channel through any one of them in most cases. This means that a lab in the United States may have a very satisfactory metrological traceability for some of their measurements that have no participation from NIST in their chain of comparisons.
Management Systems Accreditation
- What is certification?
- What is a certification body (CB)?
- What are the benefits of management systems certification?
- How can I obtain a list of ANAB-accredited management systems CBs?
- How does ANAB determine whether a management systems CB meets ANAB’s accreditation criteria?
- How often are accredited management systems CBs re-examined?
- What should I do if I believe that an ANAB-accredited management systems CB has not done an adequate job?
- How can my organization become an ANAB-accredited management systems CB?
- What is the certification process for management systems?
- What is a pre-assessment?
- Who does a CB interview during the course of the certification process?
- How helpful may a management systems CB be to the success of an organization’s certification effort?
- How much does management systems certification cost?
- Must management systems certification be periodically renewed?
- What happens if a CB finds nonconformities at a facility during the management systems certification audit?
- If the CB discovers a regulatory noncompliance during an EMS certification audit, does the organization fail the audit?
- What is IAAR?
Certification is the act of verifying the conformance to a standard or other requirements. A certification body audits an organization and, if appropriate, a certificate of conformance to a given standard (for example, ISO 9001 for quality management systems) is issued. With regard to management systems, the terms certification and registration are used interchangeably. (Certification also refers to the process of validating and verifying the credentials of individuals, such as auditors.)
What is a certification body (CB)?
A CB (also known as a registrar) is a third-party company contracted to evaluate the conformance of an organization to the requirements of the appropriate standard(s) and issue a certificate of conformance when warranted.
What are the benefits of management systems certification?
Benefits of implementing quality management systems include increased operational efficiency; an opportunity to critically examine how employees do their work and interact between functions; establishing the proper processes for future operations; better documentation of methods and responsibilities; consistency of process; greater employee awareness about quality; cost savings from less scrap and rework, as well as fewer warranty claims; enhanced communication among employees; customer satisfaction; competitive edge; increased credibility; ease of trade; perceived higher quality; reduced customer audits; increased market share; and fulfilling supplier requirements for certification.
Benefits of implementing environmental management systems include potential reduction in process by-products and wastes ; greater employee awareness about the environment and the impact of their jobs on it; potential increased energy efficiency and energy conservation in design, production, and postproduction processes; creation of systematic structure for complying with environmental regulations; customer satisfaction/requirement; competitive advantage; ease of trade, avoiding non-tariff trade barriers; potential for improved market share; and improved image with community and environmental groups.
Implementing other management systems may offer some of the same benefits, as well as benefits unique to the specified type of management system.
How can I obtain a list of ANAB-accredited management systems CBs?
This site contains a searchable directory of accredited management systems CBs. You can search the directory by CB name, location, scope category (for QMS), and other qualifications.
How does ANAB determine whether a management systems CB meets ANAB’s accreditation criteria?
ANAB accreditation assessors evaluate a prospective CB’s written policies and procedures, including the credentials of its auditors. If all of these are acceptable, the ANAB assessor team performs a rigorous on-site examination of the CB’s internal operations and then witnesses the CB conducting a complete client audit.
How often are accredited management systems CBs reassessed?
Management Systems Accreditation is typically valid for five years. Maintaining accreditation includes at a minimum, an annual office assessment and annual witnessed assessment/s with a complete reassessment required every five years. Depending on the scope of accreditation, oversight may increase to cover additional industry sectors (e.g. Aerospace programs).
What should I do if I believe that an ANAB-accredited management systems CB has not done an adequate job?
Each management systems CB is required to have a system for handling complaints. ANAB evaluates the operation of the complaint system during its surveillance. Every CB also has an appeals system through which clients can appeal adverse decisions. The CB’s appeals system is also evaluated by ANAB during surveillance.
If you have a complaint, please go to ANAB’s online complaint center.
How can my organization become an ANAB-accredited management systems CB?
There is information about applications and the accreditation process on this website. While ANAB accepts applications from CBs based outside of North America, ANAB encourages such CBs to seek accreditation by their local national accreditation body.
What is the certification process for management systems?
Certification is done by a CB through a series of document reviews and facility visits and audits. The CB’s auditors examine an organization’s procedures, processes, and operations to determine their conformance to the requirements (elements) of the standard.
The CB evaluates a variety of issues. For QMS certification, these include but are not limited to the applicant organization’s administrative, design, and production processes; quality system documentation; personnel training records; management reviews; and internal audit processes. For EMS certification, these include but are not limited to the applicant organization’s administrative processes; technical capabilities and operations; training and experience of personnel; regulatory compliance; environmental aspects and impacts; and management review and internal audit processes.
The certification process can take anywhere from several weeks to more than a year, depending on the readiness of the organization applying for certification. Other factors that can contribute to the amount of time certification takes are the size of the organization, the scope of the certification, and the number of facilities being certified and their location.
What is a pre-assessment?
Pre-assessment is an option offered by most CBs to help an organization determine its readiness for the certification audit. Other terms for pre-assessment are pre-audit and trial audit. Pre-assessments offer the opportunity for a “no-risk-of-failure” audit and the experience of a third-party audit.
During a pre-assessment, the audit team evaluates all applicable management systems elements for approach, implementation, and the amount of evidence available. Audit findings are limited to weak implementation or failure to address an element or requirement. These are described in a written pre-assessment report; formal nonconformance reports may not be issued.
Accredited CBs are not permitted to offer advice on how to resolve nonconformances, as this would be considered consulting. Accredited CBs are not allowed to offer certification and consulting together. ANAB limits the number and frequency of pre-assessments to prevent the perception of consulting or advice giving.
Who does a CB interview during the course of the certification process?
The CB’s audit team can interview anyone from the chief executive officer to line workers and operators. This interview process is typically done on a sampling basis and covers a wide range of personnel from diverse divisions and departments.
How helpful may a management systems CB be to the success of an organization’s certification effort?
A management systems CB may not engage in advice-giving or consulting with the organization it is certifying. One of the conditions of accreditation is that certification and consulting may not be marketed together, nor may it be said or implied that certification may be easier as a result of using the services of a particular consultant. Persons engaged in both certification assessment and consulting for the same organization must separate these activities by at least two years of time. ANAB considers private or tailored training to be consulting if it is offered by a CB (or related body) to an organization being certified.
How much does management systems certification cost?
The cost of certification depends on a variety of factors including but not limited to the amount of time that the process takes, which is based in part on the size of the organization, the scope of the certification, and the number of facilities being certified and their location. Other factors may also come into play. For example, whether an organization seeking ISO 14001 certification already has an ISO 9001 system in place and whether that system is registered may have an impact on the cost.
ANAB provides accreditation, not certification. We suggest you contact an ANAB-accredited certification body, as they will be able to provide more specific information about the cost of certification for your organization.
Must management systems certification be periodically renewed?
Yes. The process includes annual surveillance audits and a periodic re-assessment. The two most common processes for surveillance audits are one surveillance audit annually or two surveillance audits annually at approximately six-month intervals. The total number of audits days annually is usually the same in either case, as this is established by IAF Guidance, and should total about one-third of the days required for the initial audit.
A re-assessment audit is also required. Normally this occurs in the third year of a certification cycle, with an audit duration of about two-thirds the number of days required for the initial audit; this is also established by IAF Guidance.
IAF guidance allows flexibility in the frequency of the audits and audit duration. The CB is responsible for assuring that the surveillance and re-assessment program is sufficient to verify continued conformance of a certified organization. ANAB requires the CB to have documented justification for any variation from the surveillance and re-assessment audit frequency and duration specified in the IAF Guidance.
It’s important to note that some CBs issue certificates for three years with an expiration date. Others do not include an expiration date on the certificate and it is considered valid unless withdrawn. Both of these are acceptable options. In all cases with either system, if there is any question about the validity of a current certificate, one should contact the CB directly.
What happens if a CB finds nonconformities at a facility during the management systems certification audit?
There are several degrees of nonconformities, or NCRs. Typically, these are minor and major NCRs, and possibly also observations.
An observation is just that: an observation. Not a violation of the criteria, an observation is typically an identification that there may be a better way to monitor a process or document a procedure. It’s not a problem, just a potential for improvement – a way to avoid future problems.
A minor nonconformance by itself doesn’t indicate a systemic problem with the management system. It is typically an isolated or random incident. An example would be not having the most current version of a document available at an operator’s station; the updated version exists but a copy of it is not available for the operator’s use and the operator is using an outdated procedure. Other examples are a form without a document control number on it, a micrometer that is out of calibration, and an internal audit finding with an overdue corrective action request pending.
A major nonconformance occurs when one of the criteria of the standard has not been addressed or has not been addressed adequately. Typically, major NCRs occur when an organization has not addressed all of the requirements of a specific element or criterion. They also occur when an organization has put a process or procedure in place but has not implemented it or cannot yet demonstrate effective implementation.
A major nonconformance can also occur if a significant number of minor NCRs in a given activity or against a given element point to a systemic failure. For example, a minor nonconformance in document control may not in itself constitute a significant problem. But if several problems (the audit team leader judges what constitutes a significant number) are found with document control, then this points to a larger systemic document control problem and would constitute a major nonconformance.
If the CB discovers a regulatory noncompliance during an EMS certification audit, does the organization fail the audit?
A regulatory noncompliance won’t necessarily result in failing the certification audit. CBs recognize that all facilities will be out of regulatory compliance at one time or another. The CB’s audit team will look at how an organization handled the situation. Did the system identify how to address the noncompliance? Was it reported quickly and properly? Was a root-cause analysis done to prevent future violations? How the environmental management system responded to the noncompliance will determine whether an organization passes the certification audit.
What is IAAR?
The Independent Association of Accredited Registrars (IAAR) is an association of accredited management systems CBs operating in North America. IAAR actively promotes the establishment and maintenance of effective management systems in companies through the use of accredited certification. ANAB representatives play an active role in IAAR activities.
Greenhouse Gas Validation/Verification Bodies
- What is the purpose of becoming a greenhouse gas validation/verification body (V/VB)?
- How do I learn more about how to become a V/VB?
- What’s the cost to become an ANAB accredited GHG V/VB?
- What steps does the accreditation process follow and how long does it take to achieve accreditation?
- Is a witness assessment required for accreditation and is a V/VB applying for ANAB Accreditation required to complete a witness assessment for each scope that it has applied for?
What is the purpose of becoming a greenhouse gas validation/verification body (V/VB)?
The purpose of becoming an ANSAB accredited V/VB is to demonstrate conformance with ISO 14065:2007, Greenhouse gases – Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition.
The purpose of GHG validation or verification accreditation is to give confidence to parties that rely on a GHG assertion or claim (for example, regulators or investors) that the V/VBs providing the declarations are competent to do so, and have systems in place to manage impartiality and to provide the required level of assurance on a consistent basis.
ISO 14065 provides requirements for bodies that undertake GHG validation or verification using ISO 14064 or other relevant standards or specifications. The objectives of the ISO 14064 and ISO 14065 standards are to:
- Develop flexible, regime-neutral tools for use in voluntary or regulatory GHG schemes.
- Promote and harmonize best practice.
- Support the environmental integrity of GHG assertions.
- Assist organizations to manage GHG-related opportunities and risks.
- Support the development of GHG programs and markets.
ANAB provides accreditation to V/VBs that seek to provide verification for reporters and projects for the following GHG programs:
- Alberta Technology Innovation and Emissions Reduction Regulation
- American Carbon Registry
- Architecture for REDD+ Transactions, The REDD+ Environmental Excellence Standard
- British Columbia Greenhouse Gas Emission Reporting Regulation
- British Columbia Greenhouse Gas Emission Control Regulation
- Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA)
- Climate Action Reserve
- Colorado Air Quality Control Commission Recovered Methane Regulation
- Environment and Climate Change Canada Output-Based Pricing System
- Environment and Climate Change Canada Clean Fuel Regulations
- Gold Standard Foundation
- Newfoundland and Labrador Regulation 14/17
- Ontario Regulation O. Reg. 390/18
- Oregon Department of Environmental Quality Greenhouse Gas Reporting Program
- Province of Nova Scotia, Greenhouse Gas Emission Regulations
- Province of Saskatchewan Reporting Regulations
- Quebec Regulation Q-2, r.15 Reporting Regulation
- Quebec Regulation Q-2, r.46.1 Cap & Trade Regulation
- Regional Greenhouse Gas Initiative*
- The Climate Registry
- Verra’s Verified Carbon Standard
- World Bank Forest Carbon Partnership Facility
*Offsets only and subject to state requirements for verifier recognition
How do I learn more about how to become a V/VB?
Organizations interested in developing validation/verification programs can find more information through the following sources in addition to the GHG program links provided above (this is not intended to provide a complete list of references nor does it imply ANSI endorsement of the services provided by the organizations listed below):
- GHG Management Institute
- Canadian Standards Association
- Trinity Consultants
- The WRI/WBCSD Greenhouse Gas Protocol
- Relevant ISO standards including ISO 14064 and ISO 14065
What’s the cost to become an ANAB accredited GHG V/VB?
Please contact us for a quote.
What steps does the accreditation process follow and how long does it take to achieve accreditation?
The detailed steps of accreditation are listed here.
The amount of time that it takes for a V/VB to complete the accreditation process depends on a number of factors, such as:
- Scope of validation/verification services for which the applicant body seeks accreditation.
- The V/VB’s understanding and implementation of the requirements of ISO 14065:2007, ISO 14064-3:2006, and the requirements of the relevant GHG protocols or registries for which the applicant seeks accreditation.
On average, the process takes approximately one year to complete. However, many organizations achieve accreditation in less than six months.
Is a witness assessment required for accreditation and is a V/VB applying for ANAB Accreditation required to complete a witness assessment for each scope that it has applied for?
A witness assessment (ANSI observation of V/VB carrying out third-party validation/verification of GHG assertion) is required as a component of the accreditation process. The purpose of the witness assessment is to determine that the V/VB understands and is implementing its verification procedures as defined by ISO 14065:2007, ISO 14064-3:2006, the relevant GHG program or registry requirements, as well as the applicant’s own internal procedures and processes for conducting GHG validation/verification.
A witness assessment for project verification will not serve as satisfactory completion of a witness assessment for the purposes of attaining verification as a inventory verifier and vice versa. In addition, for project validation and verification, multiple witness assessments may be required depending on the scope of the application. Witnesses for project validation will count toward accreditation for project verification.
For more information, please see GHG-PR-706: ANSI GHG Validation and Verification Body Accreditation Scoping Policy.
Questions can be addressed to:
Ann Howard
Senior Director, Validation and Verification
202-331-3620
Personnel Credentialing
- What’s the difference between certification and certificate?
- Can a certification body offer training or educational programs ?
- Can a new certification program apply for ANAB accreditation?
- What’s the time frame to close a nonconformity?
- What happens if a CB has applied for accreditation for five certification programs (schemes) and two of them have nonconformities?
- How do I find information about food handler certificates?
- Whom do I contact for more information?
What’s the difference between certification and certificate?
Certification and certificate are distinct terms, yet they are often used synonymously. Certification is a more comprehensive and necessarily includes an assessment of an individual’s knowledge, skills, and abilities based on a body of knowledge pertaining to a profession or occupation. In comparison, certificate programs emphasize learning events and coursework completion. Certification is valid for a specific time period and involves recertification at the expiry of the stated period. Certificates are generally issued for life!
Can a certification body offer training or educational programs?
A certification body can offer training/educational programs, however, it needs to demonstrate that there are clear firewalls between training and certification.
Can a new certification program apply for ANAB accreditation?
There is no ANAB policy that prevents a new certification program from applying for ANAB accreditation. However, to demonstrate that the examinations are fair, valid, and reliable, the certification body needs to have adequate data collected from test takers to conduct statistical analyses.
What’s the time frame to close a nonconformity?
All accredited CBs must post a corrective action plan within 30 days and close the nonconformity within 90 days.
What happens if a CB has applied for accreditation for five certification programs (schemes) and two of them have nonconformities?
The certification body shall be accredited only when all the non-conformities relating are closed. In the above case, if two certification schemes have non-conformities, then the certification body will not be accredited. One way to address this issue is through scope reduction/expansion.
How do I find information about food handler certificates?
In the food-handling arena, ANAB accredits two types of credentialing bodies: (1) the ANAB-CFP program for food protection managers based on the Conference for Food Protection (CFP) standard and (2) organizations providing food-handler training courses and certificates.
Whom do I contact for more information?
Vijay Krishna, Vice President, Credentialing Programs
202-331-3614
Product Certification
- What is product certification?
- How is ANAB involved in assessing the conformity of products to standards?
- What are the advantages for product certification programs that are accredited by ANAB?
- Who recognizes ANAB’s accreditation program?
- How does my organization apply for accreditation?
- How does my organization apply for accreditation?
- Whom do I contact for more information?
What is product certification?
Certification attests that a product meets specified standards, especially for quality or safety and health issues.
A certification mark provides unique credibility when granted by an independent third party that is accredited under a globally-recognized process. A certification mark is designed to resemble the ANSI logo, but carries a distinct message that a product or personnel certification program has been accredited by ANSI.
How is ANAB involved in assessing the conformity of products to standards?
ANAB does not conduct tests or technical evaluations of products, systems or services; rather, ANAB provides accreditation services.
ANAB accreditation recognizes the competence of bodies to carry out product or personnel certification in accordance with requirements defined in international standards. ANAB administers more than 30 distinct product accreditation program scopes – ranging from appliances and bottled water to plumbing products and fresh produce.
What are the advantages for product certification programs that are accredited by ANAB?
Ultimately, the marketplace and customers of this service measure the beneficial value of accreditation.
However, ANAB provides accreditation for product certification programs in accordance with international standards (ISO/IEC 17065). ANAB is also involved in several international and regional arrangements for mutual recognition of equivalency across boundaries. As a result, many of the ANAB-accredited certification programs are recognized as equivalent to commensurate programs around the world.
Businesses whose products earn a certification mark from a product certification program that has been accredited by ANAB will discover that they have more freedom to compete in many markets around the world, often without the requirement for a duplicative test or mark. Doors open to new markets, products compete on a level playing field, and regulatory costs can be minimized.
Who recognizes ANAB’s accreditation program?
Domestically, ANAB is recognized by the National Institute of Standards and Technology (NIST) as an accreditor of Telecommunication Certification Bodies by the National Voluntary Conformity Assessment System Education Program (NVCASE) in compliance with requirements of the Federal Communications Commission (FCC).
Internationally, in accordance with phase II of the Asia-Pacific Economic Cooperation (APEC) Mutual Recognition Arrangement on Telecommunication Equipment, ANSI has been recognized by Industry Canada as the accreditor of U.S. “certification bodies” for approving telecommunications equipment for compliance with Canadian requirements. In addition, the United State has implemented the first phase of the agreement, which allows test results from approved U.S. labs to be considered as evidence of compliance, with three other APEC economies: Australia, Singapore and Chinese Taipei (Taiwan).
More information about ANAB recognition
ANAB is also recognized as an accreditor of bodies certifying fresh fruits and vegetables by the Euro-Retailer Produce Good Agricultural Practices.
How does my organization apply for accreditation?
The first step in the ANAB application procedure is submission of a letter of application by the certification body. The purpose is to enable ANAB to judge the eligibility of the certification program for accreditation. A comprehensive description of the application process can be found in the How to Apply section of this website.
Whom do I contact for more information?
To submit the letter of application or for more information, please contact:
Reinaldo Figueiredo
Vice President, Conformity Assessment Strategy
202-331-3611
Nikki Jackson
Senior Director, Product Certification Accreditation
202-331-3623
of further interest
- August 2, 2024
ANAB NEWSLETTER SUBSCRIPTIONS